Current position >About Us
1.Operating Manual
Use the rotameter on the front panel to check that the sample flow rate is approximately 2.0 scfh. • Check for excessive accumulation of dirt. In dusty locations, you may need to wipe or gently blow off dust
2.Rotameter Calibration | F
Fluke experts show you how to calibrate a pressure rotameter including a step-by-step rotameter calibration procedure, calibration curve, and tips.
3.Rotameter Calibration | Fu
of the rotameter as possible. how to calibrate a rotameter follow this rotameter calibration procedure, step by step. step 1. start the flow of gas. fluke recommends starting at the highest flow and working down. this results in better purging of the calibration gas, and better results at...
4.Rotameter - an overview |
The accuracy can be of the order of 0.5% for flow rates above 10% of maximum, i.e. the normal working range if 10:1. The range can be increased by connecting several meters in series. Each meter is arranged to have an expanded section at the top of the tube so that when the floa...
5.Rotameter | Springer Natu
\ ▐ rō-tә- ▐ mē-tәr, ro- ▐ ta-mә-tәr\ n [L rota + English – meter ] (1907) A simple flow-measuring device for gases and low-viscosity liquids consisting of a vertical glass tube whose internal diameter increases gradually from bottom to top, graduated on the...
6.What is a Variable Area F
Small glass tube rotameters are suitable for working with pressures up to 500 psig, but the maximum operating pressure of a large (2-in diameter) tube may be as low as 100 psig. The practical temperature limit is about 400oF, but such high-temperature operation substantially reduces the ope...